The Official Star Trek Movie Forum

The Official Star Trek Movie Forum > Star Trek > General Star Trek Discussions > Trek Tech > Ships, Devices, etc. > Questions about the structural integrity field
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2010, 08:20 PM
Whitestar's Avatar
Whitestar Whitestar is offline
Ensign
 
Join Date: Jan 2008
Location: Florida
Posts: 90
Default Questions about the structural integrity field

I've always found the Enterprise A to be the most beautiful Enterprise of all time, such a graceful and sexy design. It was the only starship in which it looked great at every angle. However, one of the things that bothered me about it was its neck section and the warp pylon struts, they were way too thin and frail. Just by looking at those sections I could nearly see them snap off like twigs. In TWoK, the Reliant fired on the Enterprise's neck section and it was a miracle that it didn't break apart. Realistically, it should have broken off.

1. Is this where the structural integrity field comes in?

2. Also, what would happen if the starship Enterprise traveled at maximum impulse speed without the structural integrity field? Would the neck and warp pylon struts snap off?
__________________
Have you ever remembered what life was like before you were born? That's how it will be like after you're dead.
Reply With Quote
  #2  
Old 05-31-2010, 09:48 PM
radoskal's Avatar
radoskal radoskal is offline
Commander
 
Join Date: Apr 2008
Posts: 952
Default

According to Memory Alpha

The structural integrity field (abbreviated SIF) is a technology developed by spacefaring cultures to supplement the natural structural integrity of the material their starship hulls or other constructions are composed of. Engineers use a structural integrity force field to supplement the supports and bulkheads that give a piece of architecture its shape. This technology was made necessary by the fantastic stresses and probability of a hull breach presented by warp fields and spatial phenomena present in the galaxy.
The field strength is usually measured in percentages. A structural integrity reading of 100% means that the field is accepting a maximum load of the stresses presented to the structure, and that all physical architecture is safe from that stress. As the percentage approaches zero, this means that more and more of the stress of weapons, gravity and other phenomena is being experienced by the hull itself rather than the force field. As the hull becomes damaged or breaches, the SIF becomes less effective as the hull it was designed to hold together starts to disintegrate.



If we go by this information then it would seem that the SIF's primary function is to reinforce the ships hull durring the extreme presures put upon it by warp travel and various spaceborne phenomena. In all probability it is also active durring impulse flight but that doesn't necessarily mean that a ship without an active SIF would break apart going at full impulse.



Remember that 23'd and 24th century Starship hulls are made up of materials that we can't even conceive of. Perhaps the tensile strength of the alloys used in the Enterprise A allows the engine pylons and struts to be of a thinness which by our modern material standards would seem precarious but which is perfectly acceptable in the 23d century.


A perfect example of this can be seen in Star Trek IV when Scotty divulges the secret of Transparent Aluminum which can perform the job of a six inch thick piece of plexiglass but be only one inch thick.


Given that such advancements have probably made the construction of many things much lighter and yet sturdier (somewhat like the evolution of our own skyscrapers) The appearance of a frail engine strut may actually belie it's true hardiness.
__________________
Mom, how many times do I have to tell you, Track is what athletes run on. Trek is what the Enterprise goes on.

-Free Enterprise
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -8. The time now is 02:24 PM.


Forum theme courtesy of Mark Lambert
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright © 2009 by Paramount Pictures. STAR TREK and all related
marks and logos are trademarks of CBS Studios Inc. All Rights Reserved.